Brinell Hardness Tester

Product Details:

Brinell Hardness Tester

AKB-3000

Brinell Hardness Tester, Model : AKB-3000 is designed for Brinell hardness measurement on steels and other ferrous materials and also on non ferrous materials like

Brass, Bronze, Aluminium, etc. The material can be cast, forged or rolled and the shape can be flat, round or irregular.

The actual load application system is of dead weight type combined with mechanical lever system. The supporting hydraulic system is for initial lifting of load before each

test and a damping the load application system for smooth application of load.

A separate hydraulic power pack, positioned in the bottom part of the machine increases the machine stability.

Our unique design of a floating fulcrum lever system ensures high accuracy and dependability.

The machine accuracies confirm to IS: 1500/ ISO:6506.

Additional Information:

• Delivery Time: 4-5 weeks
• Packaging Details: 2 Nos Wooden Box

Product Details:

OPTICAL BRINELL HARDNESS TESTER :OPAB-3000

This is a modified version which is provided with an inbuilt optical system of 14x magnification.

An automatic indenter index system is provided which tilts the indenter after the impression and the magnified image is visible on the screen for measurement with a 0.01 mm Least count.

Thus this machine gives fast and accurate results with less operator fatigue.

This model is mainly useful for production testing in Auto shops, Foundries, Forge shops & Heat treatment units etc.

Additional Information:

• Delivery Time: 4-5 weeks
• Packaging Details: 2 Nos. Wooden Box

Product Details:

FEATURES

• Specially designed fabricated main lever.
• Operation of the machine is by push buttons. 
• Imported linear bearings are used for plunger movement, which gives better accuracy & repeatability. 
• Hydraulic cylinder & piston assembly for lifting the main lever up down is fitted directly below the main lever. Lifter shaft in-between piston & main lever is eliminated. This will increase reliability of the machine. 
• Lever lifting piston is reduced to 15 bar at 3.2. lpm flow rate. Due to this modification oil heating will be reduced. 
• Pressure gauge has been provided in the hydraulic circuit.
• Solenoid operated valves are provided in the machine.
• Separate valves are provided for adjusting up/ down speeds of lever. 
• Cycle is fully automotive with adjustable load holding time.
• Power Pack is completely within the body. Due to this the motor & pump noise is eliminated.
• Height of the oil tank and drain port is increased and therefore oil draining is easy.
• Proximity switches are used in place of limit switches for better accuracy and reliability.
• Ball and ball seat suspension is provided to fulcrum 'V' Support of main lever. Ball Bearing guides are provided to provided to plunger for avoiding its rotation.
• Provision of fine lever ration adjustment. 
• Due to above salient features, the system friction is reduced to minium and so improved repeatability. Much better accuracy, linearity & sensitivity of the system, thus the machine is more dependable.
• The machine accuracies conforms to IS:1500/ ISO: 6506.

Additional Information:

• Delivery Time: 4-5 weeks
• Packaging Details: 2 Nos. Wooden Box

Product Details:

Optic System :

• IIlumination System - Consists of condensing tube, Condensing lens & Helogen bulb.
• Magnfication System - Consists of Matched optics, Mirror & Prism.
• Measuring Device - Consists of optical screen assembly with measuring line marked plain & frosted glass set & Micrometer with a least count of 0.01 mm & 14x magnificaiton.

• An autometer indentor swiveling index head system is provided . This system is basically for bringing the indentor axis at the centre of the spindle axis before loading & also for tilting the indentor after the impression, so that the optic axis is made clear for viewing the indentation on screen. The system operates automatically with a feedback from the position of the main lever.

Additional Information:

• Delivery Time: 4-5 Weeks
• Packaging Details: 2 Nos. Wooden Box

Product Details:

FEATURES

• The machine has a C-Type load frame.
• This machine has been designed for production testing & for continuous operation.

• This machine is used to measure Brinell hardness value of cast or forged components.
• Wide range of testing with 4 load steps.
• Hydraulically loading / unloading system is provided with load / unload knob for operation.

• Fully computerized system for indentation measurement and display.
• Window based software system.
• Accurate measurement of Brinell hardness through matched Optics, CCD Camera, Hardware & Software using advanced Image processing technology.

• On removal of load the optics will transfer the image of indentation To CCD. The image is further digitalized and processed by PC for Measurement. The diameter of the image can be measured automatically / manually to give Brinell hardness value.
• Two modes of measurement -Manual & Auto.
• In Auto mode the image is scanned for measurement & hardness is displayed automatically.
• Verification facility is provided for clear indication of measured impression by encircling the same.
• Windowing facility is provided which encircles the blurt images for better accuracies.
• Macro & Micro adjustment facilities are provided in manual mode for fast & accurate encircling of the image to be measured.
• Batch testing facility is provided.
• Statistical Analysis report can be generated.
• Calibration mode is provided with password protection.
• The machine accuracies conforms to IS2281-2005 & BS240.

Additional Information:

• Delivery Time: 4-5 Weeks
• Packaging Details: 2 Nos. Wooden Box