Metallurgical Sample preparation system

Product Details:

Single Disc Polishing Machine : 

Metallography specimen polishing machine is suitable for the polishing of the specimen which has been grinded. The specimen surface is very smooth after processing and can be used to observe and measure the metallography structure of specimen under microscope.

Additional Information:

• Delivery Time: 4-5 weeks
• Packaging Details: Cardboard Box

Product Details:

The mounting press is a mechanical type machine. By turning the hand-wheel of the machine, a couple of bevelgear is rotated to drive the screw rod which in turn pushes/pulls the lower die up and down along the mould sleeve. The thermo set plastics together with specimen being mounted is formed under heated conditions. During this process the pressure is self adjusted by a spring fixed inside the machine. A signal light is used to indicate the pressure level. The mounting press is equipped with a digit temperature controller to establish real-time temperature meanwhile, a timer is equipped to realize the semi-automation of sample – making, while obviously increasing working efficiency. For each specimen mounting, 8-10 minutes is enough and a mirror-like specimen can be acquired.

Additional Information:

• Delivery Time: 4-5 Weeks
• Packaging Details: Wooden Box

Product Details:

Model (RP-2T):

Metallography specimen polishing machine is suitable for the polishing of the specimen which has been grinded. The specimen surface is very smooth after processing and can be used to observe and measure the metallography structure of specimen under microscope.

Additional Information:

• Delivery Time: 3-4 Week
• Packaging Details: Cardboard Box

Product Details:

Abrasive cutter is rugged, sturdy and designed to cut metallurgical samples to optimal quality consistently and safely. Cutting wheel spindle is connected with motor shaft by pulley and belt mehanism.
The movement of cutting wheel towards the specimen is applied by handle fixed with motor base pivot spi-ndle and the cutter unit is balanced by springs for smooth downward movement.
FEATURES

Large corrosion resistant coated bed fixed with lead screw attachment accomodates a variety of vices andclamps for holding samples of all shapes, both large and small. Large viewing window to monitor the cutting
operation. Inside chamber is illuminated and see-through hood is provided for monitoring the cutting opera-tion. Coolant circulation isprovided with suitable filtering arrangement.

Additional Information:

• Delivery Time: 6-8 Weeks
• Packaging Details: Wooden Box

Product Details:

RBG-100 Belt Grinder, for flat, course grinding prior to fine grinding. The specimens to be ground in 60, 80 or 120 grit after cutting operation or moulding to remove surface imperfections. Useful step to remove light metallurgical damage in thespecimen surface induced during cut-off operation.

Additional Information:

• Delivery Time: 4-5 Weeks
• Packaging Details: Cardboard Box

Product Details:

This machine is very useful for preparation of spectro sample very fast and clean. Outer body made of thick MS sheet with powder coated rust proof paint.

Features:

• No need of foundation
• Easy Paper replacement
• Lockable rack for Polishing paper storage
• Machine to suit the disc housing and to cover the plate by 270 degrees for safety
• Easy to use control panel with quick access to Power On/Off
• Spectro Polisher with inbuilt Dust suction system
• Steel disc perfectly balanced with air gripping arrangements
• Over load protector for safety
• Dynamically Balanced

Additional Information:

• Delivery Time: 6-8 Weeks
• Packaging Details: Wooden Box