Micro Vickers Hardness Tester

Product Details:

Wide Test Forces
8 steps test force (10, 25, 50, 100, 200, 300, 500, 1000gmf) are available.
Fully Automatic
Fully automatic test cycle (taking Indentation →Auto Focus→Measuring Indentation→Recording  Data→Report Generation) by selecting measuring pattern.
Various Measuring Pattern
System provide more than 18 different pattern to meet customer requirements. Line, line set, free click, Horizontal line, vertical line, Curved line set, curve matrices, arc, gear fillet, gear top etc.
High Resolution Camera
Equipped with a 5 Mega Pixel high resolution USB type camera.

Product Details:

Motorized XY-stage controlled by built-in stepping motor has various control modes through mouse click control, high positioning accuracy, good repeatability, fast moving speed and high work efficiency.  Automatically scan along the edge of the sample and generate test point by defined pattern. System provide more than 18 different pattern to meet customer requirements. Line, line set, free click, Horizontal line, vertical line, Curved line set, curve matrices, arc, gear fillet, gear top etc. Various Data Output : Automatic hardness measurement, hardness curve graph, hardness conversion, statistical calculation, working data saving & retrieval, hardness report.

Product Details:

MANUAL EYEPIECE : Equipped with 10x Manual Eyepiece to measure the length of diagonal.  The hardness value can be displayed directly on LCD screen by entering the indentation diagonal length.  
TEST FORCE : Wide range of test fore (10gm to 1000gm) can be selected with external force selection knob. The test force is automatically displayed on the LCD display.
TURRET MECHANISM : Equipped with manual turret mechanism. The position of the indentor and objective lens can be switched manually.

Product Details:

ILLUMINATION SYSTEM : Halogen illumination unit gives very clear images and can be also used as a simple microscope. Halogen illumination unit enter stand by mode after a certain period of inactivity which gives it a long service life and low power consumption. 
MANUAL EYEPIECE : Equipped with 10x Manual Eyepiece to measure the length of diagonal.  The hardness value can be displayed directly on LCD screen by entering the indentation diagonal length.  
AUTO TURRET MECHANISM : Equipped with auto turret mechanism. Auto turret perform a series of operation and measuring lens automatically comes back to central position after making indentation. The position of the indenter and the objective lens can be automatically switched using keypad.

Product Details:

DIGITAL EYEPIECE : Equipped with 10x Digital Eyepiece to directly measure the length of the diagonal. The hardness value can be displayed directly and there is no need to enter the length of the diagonal.
TEST FORCE : Wide range of test force (10gm to 1000gm) can be selected with external force selection knob. The test force is automatically displayed on the 75X100mm LCD Screen.
AUTO TURRET MECHANISM : Equipped with auto turret mechanism. Auto turret perform a series of operation and measuring lens automatically comes back to central position after making indentation. The position of the indenter and the objective lens can be automatically switched using touch panel.

Product Details:

DATA OUTPUT : Equipped with built is thermal printer to take the print out the hardness result. 
TURRET MECHANISM : Equipped with manual turret mechanism. The position of the indentor and objective lens can be switched manually.
TEST FORCE : Wide range of test force (10gm to 1000gm) can be selected with external force selection knob. The test force is automatically displayed on the 75X100mm LCD Screen.

Product Details:

EMERGENCY SWITCH : Equipped with emergency stop switch.
Z-AXIS LIFTING SYSTEM : Side-Ways lifting system makes the z-axis movement more stable and accurate.
DIGITAL EYEPIECE : Equipped with 10x Digital Eyepiece to directly measure the length of the diagonal. The hardness value can be displayed directly and there is no need to enter the length of the diagonal.
DATA OUTPUT : Equipped with built is thermal printer to take the print out the hardness result USB port is also available to get the data in pendrive.

Product Details:

TURRET MECHANISM : Equipped with manual turret mechanism. The position of the indentor and objective lens can be switched manually.
DIGITAL EYEPIECE : Equipped with 10x Digital Eyepiece to directly measure the length of the diagonal. The hardness value can be displayed directly and there is no need to enter the length of the diagonal.
ILLUMINATION SYSTEM : Halogen illumination unit with adjustable intensity gives very clear images and can be also used as a simple microscope. Halogen illumination unit enter stand by mode after a certain period of inactivity which gives it a long service life and low power consumption. 

Product Details:

AUTO TURRET MECHANISM : Equipped with auto turret mechanism. Auto turret perform a series of operation and measuring lens automatically comes back to central position after making indentation. The position of the indenter and the objective lens can be automatically switched using touch panel. 
DATA OUTPUT : Equipped with built is thermal printer to take the print out the hardness result USB port is also available to get the data in pendrive.
MANUAL EYEPIECE : Equipped with 10x Manual Eyepiece to measure the length of diagonal. The hardness value can be displayed directly on LCD screen by entering the indentation diagonal length.  

Product Details:

TURRET MECHANISM : Equipped with manual turret mechanism. The position of the indentor and objective lens can be switched manually.
DATA OUTPUT : Equipped with built-in thermal printer to take the print out the hardness result.
MANUAL EYEPIECE : Equipped with 10x Manual Eyepiece to measure the length of diagonal.  The hardness value can be displayed directly on the LCD screen by entering the indentation diagonal length.  

Product Details:

DIGITAL EYEPIECE : Equipped with 10x Digital Eyepiece to directly measure the length of the diagonal. The hardness value can be displayed directly and there is no need to enter the length of the diagonal.
ILLUMINATION SYSTEM : Halogen illumination unit with adjustable intensity gives very clear images and can be also used as a simple microscope.  Halogen illumination unit enter stand by mode after a certain period of inactivity which gives it a long service life and low power consumption. 
AUTO TURRET MECHANISM : Auto turret perform a series of operation automatically. Measuring lens automatically comes back to central position after making indentation. The position of the indenter and the objective lens can be automatically switched from PC as well as using touch panel.

Product Details:

AUTO TURRET MECHANISM : Equipped with auto turret mechanism. Auto turret perform a series of operation and measuring lens automatically comes back to central position after making indentation. The position of the indenter and the objective lens can be automatically switched using touch panel.
TEST FORCE : Wide range of test force (10gm to 1000gm) can be selected with external force selection knob. The test force is automatically displayed on the 75X100mm LCD Screen.
DIGITAL EYEPIECE : Equipped with 10x Digital Eyepiece to directly measure the length of the diagonal. The hardness value can be displayed directly and there is no need to enter the length of the diagonal.

Product Details:

TEST FORCE : Wide range of test force (10gm to 1000gm) can be selected with external force selection knob. The test force is automatically displayed on the 7 inch LCD touch display.
DATA OUTPUT : Equipped with built-in thermal printer to take the print out the hardness result USB port is also available to get the data in pendrive.

Product Details:

DIGITAL EYEPIECE : Equipped with 10x Digital Eyepiece to directly measure the length of the diagonal. The hardness value can be displayed directly and there is no need to enter the length of the diagonal.
ILLUMINATION SYSTEM : Halogen illumination unit with adjustable intensity gives very clear images and can be also used as a simple microscope. Halogen illumination unit enter stand by mode after a certain period of inactivity which gives it a long service life and low power consumption. 
TEST FORCE : Wide range of test force (10gm to 1000gm) can be selected with external force selection knob. The test force is automatically displayed on the 7 inch LCD touch display.

Product Details:

TURRET MECHANISM : Equipped with manual turret mechanism. The position of the indentor and objective lens can be switched manually.
MANUAL EYEPIECE : Equipped with 10x Manual Eyepiece to measure the length of diagonal. The hardness value can be displayed directly on the LCD screen by entering the indentation diagonal length.  
CAMERA PORT : Machine equipped with dual optical channel. 5 MP USB Camera is connected to one of the dual optical channels, other optical channel is for 10X eyepiece. Both optical channel works simultaneously.
ILLUMINATION SYSTEM : Halogen illumination unit with adjustable intensity. gives very clear images and can be also used as a simple microscope. Halogen illumination unit enter stand by mode after a certain period of inactivity which gives it a long service life and low power consumption. 

Product Details:

Software controlled hardness tester to switch between objective lens and indenter without manual control of hardness tester. Software sense the change in the test force and displays it in system in real time. Auto measurement of the four vertices of the indentation. System automatically generates a Microsoft Word or Excel Document or PDF file which contains the measurement data, statistical information, measurement image and the hardness curve graph.

Product Details:

MANUAL EYEPIECE : Equipped with 10x Manual Eyepiece to measure the length of diagonal. The hardness value can be displayed directly on LCD screen by entering the indentation diagonal length. 
TURRET MECHANISM : Equipped with manual turret mechanism. The position of the indentor and objective lens can be switched manually.
ILLUMINATION SYSTEM : Halogen illumination unit gives very clear images and can be also used as a simple microscope. Halogen illumination unit enter stand by mode after a certain period of inactivity which gives it a long service life and low power consumption. 

Product Details:

AUTO TURRET MECHANISM : Equipped with auto turret mechanism. Auto turret perform a series of operation and measuring lens automatically comes back to central position after making indentation. The position of the indenter and the objective lens can be automatically switched using keypad.
ILLUMINATION SYSTEM : Halogen illumination unit gives very clear images and can be also used as a simple microscope. Halogen illumination unit enter stand by mode after a certain period of inactivity which gives it a long service life and low power consumption. 
MANUAL EYEPIECE : Equipped with 10x Manual Eyepiece to measure the length of diagonal. The hardness value can be displayed directly on LCD screen by entering the indentation diagonal length.  

Product Details:

DATA OUTPUT : Equipped with built-in thermal printer to take the print out the hardness result. USB port is also available to get the data in pendrive. RS232 port is available to connect the machine with PC.
ILLUMINATION SYSTEM : Halogen illumination unit with adjustable intensity gives very clear images and can be also used as a simple microscope. Halogen illumination unit enter stand by mode after a certain period of inactivity which gives it a long service life and low power consumption. 
AUTO TURRET MECHANISM : Equipped with auto turret mechanism. Auto turret perform a series of operation and measuring lens automatically comes back to central position after making indentation. The position of the indenter and the objective lens can be automatically switched using touch panel. 

Product Details:

TEST FORCE : Wide range of test force (10gm to 1000gm) can be selected with external force selection knob. The test force is automatically displayed on the 75X100mm LCD Screen.
TURRET MECHANISM : Equipped with manual turret mechanism. The position of the indentor and objective lens can be switched manually.
DIGITAL EYEPIECE : Equipped with 10x Digital Eyepiece to directly measure the length of the diagonal. The hardness value can be displayed directly on LCD screen by pressing push button on eyepiece.
DATA OUTPUT : Equipped with built-in thermal printer to take the print out the hardness result.